 |
| Accident Prevention |
Definition - What does accident prevention mean?
Accident prevention refers to the plans, preparations, and actions taken to avoid or prevent accidents.
Accident prevention includes all measures in an effort to save lives, avoid injury, reduce the degree of injury, protect property from damage, reduce the cost of treatment and compensation, and prevent loss of productive time and morale.
Explains accident prevention
The old saying that "one ounce of prevention is better than one pound of cure" is true for workplace accidents. It is better to prevent an adverse event than it is before attempting to correct the damage.
Although it is impossible for employers to predict every single accident, it is their duty to allow accidents to occur and implement control measures to prevent them or minimize the damage they cause. They have a legal obligation to follow laws, standard practices, and safety observations to avoid emergencies and accidents.
Many accidents occur due to human factors, such as:
* Unsafe behavior
* Inattention
* Negligence
* lack of knowledge
* Insufficient training
Working condition is another major factor in accidents. Unsafe working conditions may include faulty machines, poor work design, inferior processes, and occupational hazards.
If preventive measures are not taken, accidents will happen. Accident prevention can be achieved through commitment and collaboration between management, safety programs, safety culture, and accountability. To maintain proper safety and avoid any incident.
Prevention requires the following actions:
* Conducting a risk assessment to identify hazards and near misses.
* For avoids incidents always keep research and development to optimize work processes and eliminate hazards.
* Unsafe machinery and equipment out of service immediately.
* Improve working conditions and workplace environment.
* Ensuring proper training for all employees.
Accident prevention
Effective implementation of machine and working conditions and consistent compliance with, the requirements and guidelines described below are critical to the safety and well-being of everyone on the project, including our customers, vendors, and the public. Accordingly, it is your responsibility to read and thoroughly observe all these safety and health practices while working on this project.
Basic safety and health practices
Daily Job Safety Analysis (JSA) is an important tool used to identify and overcome the hazards associated with your work tasks. JSA is a requirement. Your supervisor will review the safety and health requirements for each task with you before starting work.
Before starting your work, check the area to determine if problems or hazards may be present.
Know how to secure your work
* Know safe operating procedures before using a piece of equipment.
* Ensure that all work areas are adequately lighted and visible.
* Make sure that the work you do will not endanger you or your fellow workers.
* Ensure the safety of the public, vendors, and subcontinent by following and following posters and barricades.
* If your activity can endanger fellow workers or nearby equipment or materials, take the necessary steps to secure them.
* Follow the posted signs, along with the company's safety and health policies and procedures.
* To all wear personal protective equipment (PPE), when it is necessary.
* Keep work areas clean and organized. Check them constantly for threats.
* Pay full attention during the job training session.
* Report all unsafe conditions and near-miss incidents to your supervisor on topmost priority to avoid incidents.
* Be aware of your surroundings.
* Use appropriate fall protection equipment and 100% tie-off when working at elevated positions.
* Report all occupational injuries or illnesses to your supervisor immediately.
* Become familiar with and understand the project and its combined emergency procedures.
* Use appropriate manual lifting techniques and/or mechanical assistance to prevent injury.
* Do not leave materials, scraps, or tools where they can be dangerous to others. Keep your work area clean.
* Follow project energy isolation and clearance procedures at all times.
* Follow all warning signs and tags (such as "Keep out," "RF hazards," "Eye protection required," "Authorized personnel only," etc.).
* Wear a high-visibility safety vest, when operating near operating equipment or roadways.
* Horseplay is strictly prohibited.
Post a Comment
Please do not enter any spam link in the comment box.